The AGNEE Worm Gearboxes have Cast Iron Gear Case of streamlined
design completely air tight, dust proof and capable of being installed
in open without any cover. The Worm Shaft is made of Alloy Steel, duly
hardened and tempered. The Worm Wheel is made of Chill Cast Phosphorous
Bronze and teeth accurately Generated on Gear Hobbing Machines. They are
supported on Extra Heavy Duty Taper Roller anti friction Bearings of
ample margin of safety to allow adequate journals as well as thrust
loads. Lubrication is effected by splash of oil from the sump. Thus, no
special care is required except for occasional oil topping to the
required level. Air cooling is effected by means of standard
polypropylene or metal fans. Please read the
Selection of Correct Worm gear box for choosing the correct one for
your application. They are available in:
-
Vast range of Models suit
every individual's requirement
-
Some Models like C.D. 50,
60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock
or on short notice
-
Center Distances from 40
mm to 400 mm
-
In Single or Double Stage
Reductions
-
Ratios from 5:1 to 4900:1
-
Also made as per
customer's specifications, Drawing, requirements
-
Overhauling of Old Gear
Boxes also undertaken, Early delivery schedules
-
Adaptable Worm Gear Boxes,
range from CD 25mm to 85mm
Right angle worm gear boxes
contain input shafts that are positioned perpendicular to the output
shafts. Right angle worm gearboxes have up to 98% efficiency levels, and
are common in printing presses and glass cutting equipment.
Teeth profile grinding of Worm shafts on worm grinder |
Worm gear teeth generation on Gear hobbing machine
|
Boring of casing for Worm Gearbox |
Boring of casing for Worm Gearboxes |
|
Send us Enquiry
Capacity rating chart of Worm gear boxes
Salient Features
of AGNEE worm gear boxes
Dimension Charts
Adaptable Worm Gearbox
Horizontal Worm Gearbox
Vertical Worm Gearbox
Solid Shafts, Horizontal Output and Over Driven Input Shaft Worm
gear Box
|
